Products

Replacement small seat back for Wilderness Systems kayaks outfitted with Phase 3 AirPro, AirPro SOT and AirPro Tour. Seat back height is adjustable with a pull strap on the front edge of the seat.

Not compatible with Commander 120/140, Ride 115/135, Ride 115X, or West Marine Pompano 115STX as these take the larger verison (9800624)

Replacement seat back strap for Wilderness Systems Pamlico 135 and 145 with Phase 3 AirPro Outtitting (2013 - current). Strap is two pieces, a seat back and a seat height strap. Includes 1 seat back strap w/superlock adjustment fittings and 1 seat back height strap w/superlock adjustment fitting. Will need to order 2 if replacing both bow and stern seat straps.

Replacement seatback adjustment strap cleat on Wilderness Systems kayaks outfitted with the Phase 3 Air Pro outfitting. This part is used to lock in the adjustment of the seat back height. The Phase 3 Air Pro cleat is 1 3/8 inches front to back, 1 inch wide, and has a gray lever and icon showing the back raising and lowering. This part is a spring loaded cam-lock. It snaps into the front edge of the center of the Air Pro leg lifter. A width of 3/4 Inch webbing strap passes through it.

Replacement seatback spine for Wilderness Systems kayaks with Phase 3 AirPro, AirPro SOT and AirPro Tour Outfitting. The spine connects the seatback to the seat bottom.

Does not include hardware

Replacement backrest adjustment strap for Wilderness Systems Tarpon 140. Strap is one inch wide webbing, has pre-made screw holes, two super lock adjustment fittings with back icons on each terminal end. Not compatible with Tarpon 105 or 120. Strap is grey in color.

Replacement touring backand for Wilderness Systems touring kayaks. Compatible with Focus 145/150/155, Tempest 165/170, Tsunami 165/175, and Zephyr 155/160. Reuse mounting hareware.

Replacement hip pad velcro set for Wilderness Systems Touring Kayaks with Phase 3 Airpro Outfitting. Attaches to seat side walls with zelcro. Compatible with Tempest 165/170, Zephyr 155/160, and Focus 145/150/155. Does not include hip pads. 8 pinetree rivets included for install.

Replacement seat back strap for Wilderness Systems kayaks with Phase 3 AirPro Outfiiting equipped with adjustable thigh brace pads. Might also be used for older Phase 3 back bands.

Strap is grey in color

The Leg Lifter is the replacement leg lifter for the Wilderness Systems Phase 3 Seats. Mounting hardware is not included but should be able to be re-used. This is the replacement leg lifter only and not the strap.

Replacement leg lifter for Wilderness Systems Phase 3 seat system

Hardware not included

Leg lifter only, strap not included

Best used as a replacement part for a lost or damaged CSS seat back assembly.

Compatible with most Phase 3 Seat systems.

Comes with the Spring and Plunger set needed at the seat base.

The base of the Phase Lite Seat Back is 4 and 13/16 inches. The nipple is about ½ inch in diameter, protruding about ½ inch. Seat back is 14 "H x 13"W, made of hollow black plastic.

The CSS Seat Back Pad and Seat Strap are not included.

This Phase3 seat back part is common on the Wilderness Systems kayaks circa 2002 to 2012. The base of the Phase 3 Spine is 4 and 13/16 inches. The nipple on one side is about ½ inch in diameter, protruding about ½ inch. Phase 3 Lite is compatible with regular Phase 3. A complete Phase 3 Seat cannot be purchased, some of the parts are discontinued or restricted from sale.

About 4-6 feet of 3/16 inch bungee cord is recommended when rebuilding an older Phase 3 seat. Check to make sure you have your Spring and Plunger (fits into a socket in the base on one side) before you think your riser is broken.

Replacement seat back strap for Wilderness Systems kayaks with Phase 3 Outfitting (2002-2012).

32 inches long when fully extended.

Hardware not included.

Replacement T-Handle for Wilderness Systems Phase3 seating. For the end of the Phase 3 Seat Cord used to adjust the seat. Pack of 5

Best used as a replacement part for Wilderness Systems sit-on-top kayaks outfitted with Phase3 seating.

Two strap assemblies, approximately 7" long. Each assembly has 2 super locks on one inch wide webbing.

To entirely replace the seat strap system on a Wilderness Systems sit-on-top kayak outfitted with a Phase3 seat get this item + about 10-12 feet of 1 Inch Webbing. The Web Strap Pull Tabs are optional.

Replacement left crank arm for Perception Pescador Pilot pedal drive unit. Branded with Pilot logo on crank arm in white.

Mounting bolt included.

Pedal not included.