Products

The Harmony Panhead Screws pack contains 5 stainless steel panhead screws.

Pack contains 5 screws

Length: 0.5 in / 1.27 cm

Pitch: 20

Material: Stainless steel

The Harmony Pan Head Screw pack contains 5 stainless steel panhead screws. These screws are 1" long (2.54 cm), have a 1/4" diameter, and 20 threads per inch. Phillips head

Replacement set screw for Wilderness Systems and Perception Kayaks with pedal drives and/or rudders. Found within the hand steering contoller to hold the spectra cord in place as well as the rudder swivels to hold the spectra cord in place. Set screws are #10-32 X 5/16". Requires a 3/32” allen head wrench (not included). Pack of 5

Replacement crank arm bolts for Wilderness Systems Helix Pedal Drive and Perception kayaks with pedal drive system. Bolts come with lock tight on them.

Will require a 8mm hex whench for installation.

Pack of 2.

Replacement cover for the Perception Pescador Pilot Pedal Drive scupper. Used to elimate water from splashing into kayak from the pedal drive scupper location. Bungee for installation included.

Nothing will fall off your Trek 60 utility sled, even in brushy areas, thanks to this handy sled travel cover.

Replacement hardware for Perception kayak chairs. Compatible with Pescador Pro 100/120, Crank, Pilot, Outlaw, and Showdown.

Rudder Blade Assembly common on Perception and Dagger kayaks made circa year 2015 to date. This Long Pin rudder assembly will mount onto a wide range of Perception and Dagger kayaks, dating back to the 1990s, as well as any other brands of kayak outfitted with a Long Pin. Rudder Blade is made from an injection-molded thermoplastic carbon-filled nylon, approximately 3/16"H x 21"L x 3 1/4"D. Pin is 3 3/8 inches long, 3/8 inch diameter.

Replacement Levers for Perception Hinged Hatches. This style of hatch is similar the Orbix hatch, but not the same. Levers are for Perception brand oval hatches. Sold as left and right pair. Levers are Grey in color. Hardware included.

Replacement oval hatch for Perception kayaks.

Compatible with Joyride 10, 12 and Pescador 10, 12.

Hatch is 17 5/8 x 12 1/4 inches outside diameter

Hardware not included.

The Perception Oval Hatch Cover for Perception Kayaks.

Made of durable, dual-density rubber

External dimensions: 12.75" W x 17.5" L

Fits snugly over raised hatch opening - press into place

Tether cord included

Replacement collar part for the Perception Pedal Drive. Made of metal with four bolt holes spaced 2 inches apart (across the tube) and 1 1/16 inches (on sides) all on center. This collar mates with a 2nd upper collar with threaded receiver holes that is the other half of the collar. This collar faces the Quick Key.

Hardware not included

Replacement pedal drive mounting bolt assembly for Peception kays with a pedal drive system. Attaches petal drive to mounting plate (not included). Attaches to pedal drive mounting plate using mounting plates existing hardware and used a threaded knob for easy tightening and loosening.

Compatible with Crank, Pescador Pilot and Showdown.

Replacement pedal drive mounting bracket for Perception kayaks with pedal drive system.

Compatible with Crank, Pescador Pilot, and Showdown.

Comes with 2 screw and 2 washer for bow most location and 4 screws and 8 washers for mounting bridges (not included) to plate/kayak.

Replacement pedal drive quick key assebly kit for Perception kayas with a pedal drive system. Used to lock and unlock the pedal drive unit in operational use and travel postion. Mounts to pedal drive mounting plate (not included) with included hardware. Uses a threaded knob for easy tightening and loosening.

Compatible with Crank, Pescador Pilot and Showdown.

Kit includes 1 Quick Release Axle Pin with bracket, 1 bracket, 4 screws, 8 washers, 1 clevis pin and a hex wrench for installation.